2025 5 GAL Solvent Based High Gloss Acrylic Cure And Seal For Concrete
Quantity
-
Detail
About This Product
The Armor LV25 is a solvent-based acrylic cure and seal designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor LV25 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a high gloss wet-look finish. The Armor LV25 also doubles as a cure and seal and can be applied to new concrete. The Armor LV25 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.Features
- Will darken the surface to make it look wet, bringing out any dull and faded coloring.
- Meets ASTM 1315 and ASTM C 309 standards
- The protective surface film will reduce damage and deterioration caused by water absorption and surface abrasion.
- The protective surface film will reduce the growth of mold, mildew, and algae on the surface.
- Breathable, UV resistant, made in the USA. When properly applied, the Armor LV25 can provide up to 1-3 years of life on an exterior surface before the need to recoat, and up to 2-7 years of life on an interior surface.
- Coverage: Porous Surfaces: Up to 175 FT2/gallon in one coat.Smooth Surfaces (once properly prepped): Up to 200-225 FT2/gallon in one coat. Coverage will vary depending on porosity, surface condition, application method, and the amount of material applied by the applicator. The above coverage rates are estimates and will vary. Two coats are suggested for even coverage and appearance.
- Application: The Armor LV25 can be applied with a 3/8-1/2” nap roller or an acetone/solvent-resistant HVLP sprayer with Viton seals. For a consistent wet look and high gloss finish, apply two coats spaced 24 hours apart. The product should be applied in the late afternoon/early evening when air and surface temperatures are declining. The product is designed specifically for unsealed concrete and pavers, or concrete and pavers previously sealed with a solvent-based acrylic.
- VOC Regulations: This product is 700 VOC and can be shipped to every state except AZ, CA, CO, CT, DC, DE, IL, IN, MA, MD, ME, MI, NH, NJ, NY, OH, PA, RI, UT, VA. If you live in a restricted state, please consider the Armor LV25 350 VOC.
-
Customer ReviewsNo comments